fix some typos

CHANGELOG.md

@@ -140,7 +140,7 @@ This project adheres to [Semantic Versioning](http://semver.org/).
 * Redo all documentation (English, Simplified Chinese)
 
 ### Changed
-* Copyright ownership transfered to THL A29 Limited (a Tencent company).
+* Copyright ownership transferred to THL A29 Limited (a Tencent company).
 * Migrating from Premake to CMAKE (#192)
 * Resolve all warning reports
 

doc/dom.md

@@ -241,7 +241,7 @@ Some techniques about using DOM API is discussed here.
 
 ## DOM as SAX Event Publisher
 
-In RapidJSON, stringifying a DOM with `Writer` may be look a little bit weired.
+In RapidJSON, stringifying a DOM with `Writer` may be look a little bit weird.
 
 ~~~~~~~~~~cpp
 // ...

doc/encoding.md

@@ -10,7 +10,7 @@ The earlier [RFC4627](http://www.ietf.org/rfc/rfc4627.txt) stated that,
 
 > (in §6) JSON may be represented using UTF-8, UTF-16, or UTF-32. When JSON is written in UTF-8, JSON is 8bit compatible.  When JSON is written in UTF-16 or UTF-32, the binary content-transfer-encoding must be used.
 
-RapidJSON supports various encodings. It can also validate the encodings of JSON, and transconding JSON among encodings. All these features are implemented internally, without the need for external libraries (e.g. [ICU](http://site.icu-project.org/)).
+RapidJSON supports various encodings. It can also validate the encodings of JSON, and transcoding JSON among encodings. All these features are implemented internally, without the need for external libraries (e.g. [ICU](http://site.icu-project.org/)).
 
 [TOC]
 

doc/faq.md

@@ -116,7 +116,7 @@
    ~~~~~~~~~~cpp
    Value(kObjectType).Swap(d);
    ~~~~~~~~~~
-   or equivalent, but sightly longer to type:
+   or equivalent, but slightly longer to type:
    ~~~~~~~~~~cpp
    d.Swap(Value(kObjectType).Move()); 
    ~~~~~~~~~~
@@ -140,11 +140,11 @@
    }
    ~~~~~~~~~~
 
-   The most important requirement to take care of document and value life-cycle as well as consistent memory managent using the right allocator during the value transfer.
+   The most important requirement to take care of document and value life-cycle as well as consistent memory management using the right allocator during the value transfer.
    
    Simple yet most efficient way to achieve that is to modify the `address` definition above to initialize it with allocator of the `person` document, then we just add the root member of the value:
    ~~~~~~~~~~cpp
-   Documnet address(person.GetAllocator());
+   Document address(person.GetAllocator());
    ...
    person["person"].AddMember("address", address["address"], person.GetAllocator());
    ~~~~~~~~~~
@@ -174,7 +174,7 @@ Alternatively, if we don't want to explicitly refer to the root value of `addres
 
 3. Why do I need to provide the length of string?
 
-   Since C string is null-terminated, the length of string needs to be computed via `strlen()`, with linear runtime complexity. This incurs an unncessary overhead of many operations, if the user already knows the length of string.
+   Since C string is null-terminated, the length of string needs to be computed via `strlen()`, with linear runtime complexity. This incurs an unnecessary overhead of many operations, if the user already knows the length of string.
 
    Also, RapidJSON can handle `\u0000` (null character) within a string. If a string contains null characters, `strlen()` cannot return the true length of it. In such case user must provide the length of string explicitly.
 
@@ -204,7 +204,7 @@ Alternatively, if we don't want to explicitly refer to the root value of `addres
 
 2. Can it validate the encoding?
 
-   Yes, just pass `kParseValidateEncodingFlag` to `Parse()`. If there is invalid encoding in the stream, it wil generate `kParseErrorStringInvalidEncoding` error.
+   Yes, just pass `kParseValidateEncodingFlag` to `Parse()`. If there is invalid encoding in the stream, it will generate `kParseErrorStringInvalidEncoding` error.
 
 3. What is surrogate pair? Does RapidJSON support it?
 
@@ -248,7 +248,7 @@ Alternatively, if we don't want to explicitly refer to the root value of `addres
 
 1. Is RapidJSON really fast?
 
-   Yes. It may be the fastest open source JSON library. There is a [benchmark](https://github.com/miloyip/nativejson-benchmark) for evaluating performance of C/C++ JSON libaries.
+   Yes. It may be the fastest open source JSON library. There is a [benchmark](https://github.com/miloyip/nativejson-benchmark) for evaluating performance of C/C++ JSON libraries.
 
 2. Why is it fast?
 
@@ -262,13 +262,13 @@ Alternatively, if we don't want to explicitly refer to the root value of `addres
 
    The design of RapidJSON aims at reducing memory footprint.
 
-   In the SAX API, `Reader` consumes memory portional to maximum depth of JSON tree, plus maximum length of JSON string.
+   In the SAX API, `Reader` consumes memory proportional to maximum depth of JSON tree, plus maximum length of JSON string.
 
    In the DOM API, each `Value` consumes exactly 16/24 bytes for 32/64-bit architecture respectively. RapidJSON also uses a special memory allocator to minimize overhead of allocations.
 
 5. What is the purpose of being high performance?
 
-   Some applications need to process very large JSON files. Some server-side applications need to process huge amount of JSONs. Being high performance can improve both latency and throuput. In a broad sense, it will also save energy.
+   Some applications need to process very large JSON files. Some server-side applications need to process huge amount of JSONs. Being high performance can improve both latency and throughput. In a broad sense, it will also save energy.
 
 ## Gossip
 

doc/performance.md

@@ -1,6 +1,6 @@
 # Performance
 
-There is a [native JSON benchmark collection] [1] which evaluates speed, memory usage and code size of various operations among 37 JSON libaries.
+There is a [native JSON benchmark collection] [1] which evaluates speed, memory usage and code size of various operations among 37 JSON libraries.
 
 [1]: https://github.com/miloyip/nativejson-benchmark
 

doc/pointer.md

@@ -211,7 +211,7 @@ p.Stringify(sb);
 std::cout << sb.GetString() << std::endl;
 ~~~
 
-It can also stringify to URI fragment reprsentation by `StringifyUriFragment()`.
+It can also stringify to URI fragment representation by `StringifyUriFragment()`.
 
 # User-Supplied Tokens {#UserSuppliedTokens}
 

doc/sax.md

@@ -126,7 +126,7 @@ When the `Reader` encounters a JSON number, it chooses a suitable C++ type mappi
 
 When the `Reader` encounters the beginning of an object, it calls `StartObject()`. An object in JSON is a set of name-value pairs. If the object contains members it first calls `Key()` for the name of member, and then calls functions depending on the type of the value. These calls of name-value pairs repeat until calling `EndObject(SizeType memberCount)`. Note that the `memberCount` parameter is just an aid for the handler; users who do not need this parameter may ignore it.
 
-Arrays are similar to objects, but simpler. At the beginning of an array, the `Reader` calls `BeginArary()`. If there is elements, it calls functions according to the types of element. Similarly, in the last call `EndArray(SizeType elementCount)`, the parameter `elementCount` is just an aid for the handler.
+Arrays are similar to objects, but simpler. At the beginning of an array, the `Reader` calls `BeginArray()`. If there is elements, it calls functions according to the types of element. Similarly, in the last call `EndArray(SizeType elementCount)`, the parameter `elementCount` is just an aid for the handler.
 
 Every handler function returns a `bool`. Normally it should return `true`. If the handler encounters an error, it can return `false` to notify the event publisher to stop further processing.
 

doc/schema.md

@@ -49,7 +49,7 @@ if (!d.Accept(validator)) {
 
 Some notes:
 
-* One `SchemaDocment` can be referenced by multiple `SchemaValidator`s. It will not be modified by `SchemaValidator`s.
+* One `SchemaDocument` can be referenced by multiple `SchemaValidator`s. It will not be modified by `SchemaValidator`s.
 * A `SchemaValidator` may be reused to validate multiple documents. To run it for other documents, call `validator.Reset()` first.
 
 # Validation during parsing/serialization {#ParsingSerialization}

doc/tutorial.md

@@ -68,7 +68,7 @@ printf("t = %s\n", document["t"].GetBool() ? "true" : "false");
 t = true
 ~~~~~~~~~~
 
-JSON null can be queryed with `IsNull()`.
+JSON null can be queried with `IsNull()`.
 ~~~~~~~~~~cpp
 printf("n = %s\n", document["n"].IsNull() ? "null" : "?");
 ~~~~~~~~~~